When you go shopping for an iron umbrella stand, it's helpful if you know what type of design you'd like. There're numerous out there and they verge from the low-priced and cheerful bulk produced cast iron varieties right through to the antique wrought iron ones made in the Victorian time.
Wrought iron pieces were once the sign of wealth and were very popular in the backyards & mansions of the elite. Talented blacksmiths spent weeks hand crafting these items and working with the iron until they'd achieved a fantastic result.
You could find a few of these fantastic pieces at real bargain prices as sometimes they have not been looked after. Covered in rust, they could seem like excessive work to bring back to their natural elegance. Often people will chose to purchase a new iron umbrella stand instead of the antique.
But it does not really take that a lot work.You simply need a drill with the wire brush attachment, some sandpaper, a smaller hand-held wire brush and a lot of patience. When you have taken the early rust off you will need some primer, a rust inhibitor and finally some paint. You begin by removing the rust which you can do with the drill so long as you take things extremely slowly.
You'll require to use the sandpaper and handheld brush on the more intricate engravings. Once you've removed the rust and have gained a smooth surface you will require to paint the piece with a rust inhibitor. An iron umbrella stand does draw rust as you tend to either use it outdoors or place wet umbrellas in it so protecting it in this way is very critical. Then just prime the piece and apply a coat of paint and you'll own a beautiful object.
Wrought iron pieces were once the sign of wealth and were very popular in the backyards & mansions of the elite. Talented blacksmiths spent weeks hand crafting these items and working with the iron until they'd achieved a fantastic result.
You could find a few of these fantastic pieces at real bargain prices as sometimes they have not been looked after. Covered in rust, they could seem like excessive work to bring back to their natural elegance. Often people will chose to purchase a new iron umbrella stand instead of the antique.
But it does not really take that a lot work.You simply need a drill with the wire brush attachment, some sandpaper, a smaller hand-held wire brush and a lot of patience. When you have taken the early rust off you will need some primer, a rust inhibitor and finally some paint. You begin by removing the rust which you can do with the drill so long as you take things extremely slowly.
You'll require to use the sandpaper and handheld brush on the more intricate engravings. Once you've removed the rust and have gained a smooth surface you will require to paint the piece with a rust inhibitor. An iron umbrella stand does draw rust as you tend to either use it outdoors or place wet umbrellas in it so protecting it in this way is very critical. Then just prime the piece and apply a coat of paint and you'll own a beautiful object.
About the Author:
Find out what ELSE you might not know about patio umbrella stands by joining us on our website: http://www.outdoorumbrellastand.org/
No comments:
Post a Comment